You are here: Home > Welding Accessories > MIG Welding
Sort By:
Page of 2
Magnum 100SG Spool Gun for Century Wire Feed 255 K2532-1 Lincoln Electric Medium Welder Cart K520 MIG Conversion Kit with 12Vdc Solenoid K2526-1
Our Price: $199.95
List Price: $239.00
Our Price: $199.00
You save $40.00!
Our Price: $169.00
Magnum 100SG Spool Gun for Century Wire Feed 255 K2532-1 Lincoln Electric Medium Welder Cart K520 MIG Conversion Kit with 12Vdc Solenoid K2526-1
The Magnum® 100SG is a reliable, low-price aluminum welding spool gun for novice and experienced welders. For added protection, the Magnum® 100SG comes with a cushioned carrying case. To reduce the number of expendable parts needed, this spool gun uses the same contact tips and nozzles as the standard Magnum® 100L MIG gun.

Recommended for the following models:
K2783-1 Century Wire Feed 255, Lincoln Electric Power MIG 140C, 140T, 180C, 180T, Easy MIG 140, Easy MIG 180, Pro MIG 140, Pro MIG 180, Weld Pak 140, Weld Pak 180.
Lincoln Electric OEM Medium Welder Cart. For MIG (GMAW-gas-shielded solid wire) welding. Conversion kit for Lincoln Electric 125 welders with the following code numbers: Pro Core 125 (Code 11300 only), Weld Pak125HD (Code 11302 only), Easy Core 125 (Code 11503 only), Work Pak 125 (Code 11506 only), Core Pak 125 (Code 11550 only). This kit will NOT work on the following 125 welders as they cannot be converted to use gas: Pro Core 125 (Code 11631), Weld Pak 125HD (Code 11632), Easy Core 125 (Code 11633), Work Pak 125 (Code 11638), Core Pak 125 (Code 11639)
MIG Conversion Kit 230V K610-2 MIG Conversion Kit 120V K610-1 Lincoln Electric Deluxe Adjustable Gas Regulator & Hose Kit K586-1
Our Price: $159.99
Our Price: $139.99
List Price: $157.00
Our Price: $138.00
You save $19.00!
MIG Conversion Kit 230V K610-2 MIG Conversion Kit 120V K610-1 Lincoln Electric Deluxe Adjustable Gas Regulator & Hose Kit K586-1
For MIG (gas-shielded solid wire) welding. For MIG (gas-shielded solid wire) welding.  

Conversion kit for the Century K2786-1 Wire Feed 100 and other Lincoln Electric welders.
Includes a deluxe Harris regulator and 4.3 ft of gas hose.

Accommodates CO2, Argon or Argon blended gases.
Lincoln Electric Spot Timer Kit K2525-1 Lincoln Electric Small Welder Cart K2275-1  Lincoln Electric .045 (1.2mm) Innershield Welding Kit K3281-1
Our Price: $129.00
List Price: $109.99
Our Price: $89.00
You save $20.99!
Our Price: $88.40
Lincoln Electric Spot Timer Kit K2525-1 Lincoln Electric Small Welder Cart K2275-1  Lincoln Electric .045 (1.2mm) Innershield Welding Kit K3281-1
This timer kit allows you to set a fixed weld time of up to 10 seconds taht is intiated when you pull the gun trigger. Ideal for making consistent spot welds on thin sheet metal.

Used on Lincoln Electric 125 amp, 140 amp and 180 amp wire feed welders.
Fits all Lincoln Electric, Century, Marquette, and other portable Welders and plasma cutters.

Holds a 80 cu. ft. bottle.
Max diameter of cylinder is 7 in.
Max cart load 130 lbs.
Wheels = 6" x 1-1/4".
Castors = 2".
Width of cart = 11-3/4".
Height back of cart = 10-1/2".
Height front of cat = 15-1/2".
Height top of handle = 30-1/2".
Depth, front of cart to cylinder hole = 19-1/2".
Depth, front of cart to back of cart = 27".
K3281-1  Lincoln Electric .045 (1.2mm) Innershield Welding Kit. Check your owners manual or parts list and make sure this is the correct kit for your welder.
Lincoln Electric Aluminum Welding Kit .035" K664-2 Lincoln Electric Canvas Cover - Medium K2378-1 Lincoln Electric .045 (1.2mm) Innershield Welding Kit K2528-1
Our Price: $84.00
Our Price: $81.00
Our Price: $80.00
Lincoln Electric Aluminum Welding Kit  .035" K664-2 Lincoln Electric Canvas Cover - Medium K2378-1 Lincoln Electric .045 (1.2mm) Innershield Welding Kit K2528-1
Aluminum Welding Kit for Lincoln Electric welders and some Century welders. Requires 100% Argon Gas.

  • For use with Lincoln Electric and Century welders such as Weld-Pak 100, Weld-Pak 155, Pro Core 100, Pro 100, Pro Mig 135, Pro Mig 175, Weld-Pak 3200HD, Weld-Pak 5000HD, SP135T, SP-175T, Century Wirefeed 100 and others

  • Includes .035 drive roller, 6 contact tips, a liner, guide tubes, and a 1 lb. spool of SuperGlaze 4043 .035 aluminum MIG wire

  • Replaces K664-1
K2378-1 Lincoln Electric Medium Canvas Cover.

Made from attractive red canvas that is flame retardant, mildem resistant, and water repellent.

Fits Lincoln Electric Power MIG 215, 216, 255, 256, 350mp, Precision TIG 225, and Century 255.

Fits units that are: H = 33", W = 20", D = 40"
K2528-1 Lincoln Electric .045 (1.2mm) Innershield Welding Kit. Check your owners manual or parts list and make sure this is the correct kit for your welder.
Lincoln Electric Small Welder Cart K2275-3 Adjustable Argon Regulator w/Tank Pressure Gauge, Flow Gauge and 5/32" Tube Push-In Fitting 334-460-001 Harris Adjustable Argon Regulator w/10' Hose for Lincoln Electric and Century MIG Welders KH738
List Price: $109.99
Our Price: $79.00
You save $30.99!
Our Price: $79.00
List Price: $100.00
Our Price: $75.00
You save $25.00!
Lincoln Electric Small Welder Cart K2275-3 Adjustable Argon Regulator w/Tank Pressure Gauge, Flow Gauge and 5/32" Tube Push-In Fitting 334-460-001 Harris Adjustable Argon Regulator w/10' Hose for Lincoln Electric and Century MIG Welders KH738
Fits all Lincoln Electric, Century, Marquette, and other portable Welders and plasma cutters.  

Holds a 80 cu. ft. bottle.
Max diameter of cylinder is 7 in.
Max cart load 130 lbs.
Wheels = 6" x 1-1/4".
Castors = 2".
Width of cart = 11-3/4".
Height back of cart = 10-1/2".
Height front of cat = 15-1/2".
Height top of handle = 30-1/2".
Depth, front of cart to cylinder hole = 19-1/2".
Depth, front of cart to back of cart = 27".
334-460-001 Harris Argon Regulator

Adjustable 10 to 30 CFH with Tank Pressure Gauge, Flow Gauge and 5/32" Tube Push-In Fitting.

Can be used on the following Century/Marquette Models:
117-076 (2145, 83125, 83126, 20511, 125GL, 125GS), 117-077 (2155, 83136, 83137, MIGmaster 125, MIGmaster 135), 117-078 (83155, 83156, 20559, MIGmaster 150, MIGmaster 155), 117-079 (2185, 83170, 83171, M02185, 170GL, 170GS), 117-083 (M02155), 117-084 (83155, 20559), 117-092-000, 117-093-000, MB120, MB120a, WFW12179, M12179, 83-363, WS1300, MIG110, M12183, 83-319, and others.

Gas hose: Part # S26399-28
KH738 Harris Argon Regulator, adjustable, with 10' Hose for Lincoln Electric and Century MIG Welders.

KH738 will work in place of part numbers 334-285-000, 334-285-666, 334-286-000, 334-286-666, 334-303-001, 3000290, S25805, K586-1.

For Century made welders, remove one of the brass fittings from the gas hose. The hose will then slide onto the hose barb.
Lincoln Electric .045 (1.2mm) Innershield/Flux-core Welding Kit K549-2 Lincoln Electric Aluminum Welding Kit K663-2 Argon Regulator Kit with Gas Hose 4400264
List Price: $77.00
Our Price: $68.00
You save $9.00!
Our Price: $60.00
Our Price: $59.00
Lincoln Electric .045 (1.2mm) Innershield/Flux-core Welding Kit K549-2 Lincoln Electric Aluminum Welding Kit K663-2 Argon Regulator Kit with Gas Hose 4400264
K549-2 Lincoln Electric .045 (1.2mm) Innershield/Flux-core Welding Kit. Check your owners manual or parts list and make sure this is the correct kit for your welder. For Lincoln Electric welders and some Century welders.

Kit includes a drive roller, idle roller, non-metallic cable liner and 5 contact tips .035 in.
4400264 Argon Regulator kit for Lincoln Electric and Century Welders. Kit includes: Harris made 301-AR60-580 regulator, 10 ft hose Assembly, and an adaptor for CO2 tanks.
Lincoln Electric .035 Innershield/Flux-cored Wire Welding Kit K549-1 Male Plugs (2) for Century Welders 239-052-908 Teflon Liner for Aluminum Welding KP1959-1, 4325, 334-374-000
List Price: $79.40
Our Price: $52.00
You save $27.40!
Our Price: $39.99
Our Price: $34.53
Lincoln Electric .035 Innershield/Flux-cored Wire Welding Kit K549-1 Male Plugs (2) for Century Welders 239-052-908 Teflon Liner for Aluminum Welding KP1959-1
Includes a .035 contact tip, gasless nozzle, cable liner, & 10 lb spool of Lincoln Electric .035 Innershield NR-211 wire.

Works with Lincoln Electric 100 amp, 125 amp, 135 amp, 140 amp, 175 amp, 180 amp welders with a Magnum 100L gun assy.
OEM Male Welding Plugs (2) for most Century Welders.

Replaces 4031, 40310
Teflon MIG Gun Cable Liner for Aluminum Welding,

Replaces Century/Solar part numbers: 4325, 334-230-000, 334-230-001, and 334-374-000.
Argon Regulator Preset to 20 CFH with 5/32" Tube Push-In Fitting 334-438-000 Century Welder Drive Roller .040/.045 541-276-666, 4341 Male Dinse Plug 50mm K852-50
Our Price: $34.00
Our Price: $28.19
List Price: $32.01
Our Price: $26.99
You save $5.02!
Argon Regulator Preset to 20 CFH with 5/32" Tube Push-In Fitting 334-438-000 Century Welder Drive Roller, .040 / .045 541-276-000 Male Dinse Plug 50mm K852-50
334-438-000 F.R.O.G.  Preset Regulator.
 
Gas flow rate is preset to 20 CFH and has pop-up tank low pressure indicator.

Can be used on the following Century/Marquette Models:
117-076 (2145, 83125, 83126, 20511, 125GL, 125GS), 117-077 (2155, 83136, 83137, MIGmaster 125, MIGmaster 135), 117-078 (83155, 83156, 20559, MIGmaster 150, MIGmaster 155), 117-079 (2185, 83170, 83171, M02185, 170GL, 170GS), 117-083 (M02155), 117-084 (83155, 20559), 117-092-000, 117-093-000, MB120, MB120a, WFW12179, M12179, M12179B, 83-636, MIG110, WS1300, M12183, M12183B, 83-319, and others.

Gas hose: Part # S26399-28
Century Welder Drive Roller .040/.045


Replaces part # 310-119-000, 310-119-500, 310-119-908, 4341, 43410
Twist Mate™ plug for connecting welding cable to output terminals. Contains one plug.

 • For cable size #1-2, 35-50mm2
 • Shaft size 12.7mm
 • Rated 300 amps
Lincoln Electric Small Canvas Cover Red KH495 Spot Welding Nozzle KP21-62-FAS Century Drive Roller .023/.030/.035 310-122-500, 4323
List Price: $35.49
Our Price: $29.99
Sale Price: $25.00
You save $10.49!
Our Price: $18.83
Our Price: $16.16
Lincoln Electric Small Canvas Cover Red KH495 Spot Welding Nozzle KP21-62-FAS Century Drive Roller .023/.030/.035 310-122-500
Lincoln Electric Small Canvas Cover with Lincoln Electric logo.
KP21-62-FAS Lincoln Electric/Century Spot Welding Nozzle (1 pack). Century OEM Drive Roller .023/.030/.035

This model replaces part #: 4323, 310-122, 310-122-000, 310-122-100, 310-122-908, 35000332
Male Dinse Plug 25mm K852-25 Gas Hose 5/32"OD X 11ft S26399-28 MIG Nozzle (1 pack) KH725
Our Price: $13.99
Our Price: $13.70
Our Price: $11.00
Male Dinse Plug 25mm K852-25 Gas Hose 5/32"OD X 11ft S26399-28 MIG Nozzle (1 pack) KH725
K852-25 25mm Male Dinse Plug.

Twist Mate™ plug for connecting welding cable to output terminals. Contains one plug.

 • For cable size #4-6, 16-25mm2
 • Shaft size 9.5mm
 • Rated 200 Amps
S26399-28 Argon/CO2 Gas Hose, 5/32" OD x 11 ft.

Goes with regulator part numbers 334-438-000 and 334-460-001.
KH725 Lincoln Electric MIG Welding Gas Shielding Nozzle (1 pack).