Century Wire Feed 255 Flux-Cored/MIG Welder (NEW) K2783-1

The Century 255 Flux-Cored/MIG Wire-Feed Welder has a 30 to 255 amp output to weld a range of thicknesses and includes a nozzle for MIG welding (requires MIG wire, sold separately). The flux-cored wire feed welds 18 gauge sheet metal to 3/16" thick steel in one pass and up to 1/2" in multiple passes. It has a 20% duty cycle at 255 amps that allows it to run 2 minutes out of each 10-minute period without overheating. Built-in thermal overload protection provides extended life. The welder comes with a gas regulator and hose, work cable and clamp, gun and cable assembly, contact tips, MIG welding nozzle, and an input cable with attached plug.

WARNING: Cancer and reproductive harm
www.P65warnings.ca.gov

Includes:
15’ Magnum® 250L gun and cable assembly with .035 contact tip
10 Ft. Work cable and clamp
.045 Spare contact tip
MIG welding nozzle
Adjustable gas regulator and hose
Reel adapters for 2” and 3” wide 8” diameter spools
Instruction manual
10 Ft. Input cable with attached plug
Three-year warranty parts and labor, 90 days on gun and cable assembly
Spool Gun Ready. Add a Lincoln Magnum® 100SG Spool gun, part #K2532-1
Built in thermal overload protection
Running gear with single cylinder rack integrated to base ( maximum cylinder size 48” (122 cm))