|
|
|
|
|
|
|
|
|
|
|
.The (NEW) 220v Marquette By Lincoln Electric Auto-Pro 155S Stick Welder is compact for portability and has a 10 to 155 amp output that supports mild steel stick electrode diameters from 5/64" to 5/32". The smooth arc provides strong welds on 18 gauge sheet metal to 5/16" thick steel. Welder runs off of 220v and has a 30% duty cycle at 150 amps that allows it to run 3 minutes out of each 10-minute period without overheating. A continuous amperage control permits exact temperature setting for consistent welds. The welder comes with a shoulder strap, work cables, electrode holder, work clamp, and input cable with attached three-prong plug
|
The 120v Marquette By Lincoln AutoPro 90S (NEW) Stick Welder is compact for portability and has a 10 to 90 amp output that supports mild steel stick electrode diameters from 1/16" to 5/64". The smooth arc provides strong welds on 18 to 14 gauge sheet metal. It has a 20% duty cycle that allows it to run 2 minutes out of each 10-minute period without overheating. A continuous amperage control permits exact temperature setting for consistent welds. It comes with a shoulder strap, work cable, electrode holder, work clamp, and input cable with attached plug.
WARNING: Cancer and reproductive harm www.P65warnings.ca.gov
|
The Century Inverter Arc 120 Stick Welder is compact for portability and has a 10 to 90 amp output that supports mild steel stick electrode diameters from 1/16" to 5/64".
|
|
|
|
|
|
|
|
|
|
|
|
|
.The (NEW) 220v Marquette By Lincoln Electric Auto-Pro 155S Stick Welder is compact for portability and has a 10 to 155 amp output that supports mild steel stick electrode diameters from 5/64" to 5/32". The smooth arc provides strong welds on 18 gauge sheet metal to 5/16" thick steel. Welder runs off of 220v and has a 30% duty cycle at 150 amps that allows it to run 3 minutes out of each 10-minute period without overheating. A continuous amperage control permits exact temperature setting for consistent welds. The welder comes with a shoulder strap, work cables, electrode holder, work clamp, and input cable with attached three-prong plug
|
Lincoln Electric Darkfire Auto Darkening Helmet Variable shade 9-13 with gloves
|
The 4400155 Harris Port-A-Torch contains all the quality equipment needed for brazing (tanks not included). The will weld up to 1/16" as supplied.
Kit Contains: - Harris 19-6a Torch Handle. - Harris H-16-2E Mixer - Harris Brazing tips 23A90-1 and 23A90-3. - Harris 601-80-540A Oxygen Regulator. - Harris 301-80-200A Fuel Regulator. - 12ft x 3/16" Hose. - Molded Plastic Carry Case. - Brazing Goggles and Striker.
|
|
|
|
|
|
|
|
|
|
|
***** Free Shipping ***** The Marquette By Lincoln AUTOPRO 20 Plasma Cutter is a professional-grade, lightweight, portable plasma cutting system that can be carried anywhere with little effort. It is ideal for the farm, HVAC, autobody shop, contractor, sheet metal fabricator, and home owner for metal cutting jobs. Cuts 1/8" with a maximum of 1/4".
|
Harris 5400855 Nitrogen Flow Meter allows for low controlled flow of nitrogen gas through the copper tube to prevent oxidation (new). Flowmeter must be mounted vertically for accurate reading. KH1153. - Model 31-2 N2 - Nitrogen - Flow Capacity SCFH is 0-70 - Compensated PSIG is 50 - Max Inlet PSIG is 100 - Inlet Connection is 1/4" - SAE Flare - Outlet Connection is 1/4" - SAE Flare
|
|