Lincoln Electric Factory Reconditioned SP-140T MIG Welder U2688-3

The factory-Reconditioned Lincoln Electric U2688-3 SP-140T MIG Welder can weld with either solid MIG wire or flux-cored wire for a range and has a 30 to 140 amp DC output for a range of projects. The wire feed supports flux-cored welding on 18 gauge to 3/16" thick steel and solid MIG welding on 24 gauge to 10 gauge steel. It has a precision wire feed system that reduces the chance of wire tangling and crushing. A brass-to-brass gun connection provides enhanced conductivity. The circuit board is sealed for protection from the environment and sits in a rigid plastic tray for shock resistance. The welder has a 20% duty cycle at 90 amps that allows it to run 2 minutes out of each 10-minute period without overheating. Welder ships direct to you from the factory.

WARNING: Cancer and reproductive harm
www.P65warnings.ca.gov

Includes:

One (1) Factory-Reconditioned Lincoln Electric U2688-3 SP-140T MIG Welder with Magnum 100L welding gun and 10' cable
One (1) gas nozzle
One (1) gasless nozzle
One (1) gas diffuser
One (1) cable liner
Three (3) 0.025" contact tips
Three (3) 0.035" contact tips
One (1) work cable and clamp
One (1) adjustable gas regulator and hose
One (1) spindle adapter
One (1) 1 lb. spool of 0.025" (0.6 mm) SuperArc L-56 Mild Steel MIG wire
One (1) 1 lb. spool of 0.035" (0.9 mm) Innershield NR-211-MP flux-cored wire
One (1) 0.025" (0.6 mm) drive roll
One (1) 0.025"-0.030"(0.6 - 0.7 mm) drive roll
One (1) 0.030"-0.045" (0.7 - 1.1 mm) knurled drive roll
One (1) 0.025"-0.035" (0.6 - 0.9 mm) wire guide
One (1) 0.035"-0.045" (0.9 - 1.1 mm) wire guide
One (1) Instructional DVD